Guitar Hero World Tour Super Bundle (Game + Accessories) Xbox 360

Extracts Power From OBD-II Pass-through Cable

The Thinkware OBDTH01 OBD-II Power Harness makes installing Thinkware dash cams easy. Instead of connecting 3 wires to the vehicle’s fuse box, the OBD-II harness simply connects to the OBD-II port in the vehicle, providing Plug & Play Installation. Once connected, access to the Parking surveillance mode on your Thinkware Dash Cam will be enabled, just as if you had hard wired the dash cam using the HWC Hard Wire Kit. The kit includes an OBD-II T-Harness that features an OBD-II plug and socket, allowing it to plug in-line with the vehicles OBD-II port. This enables other OBD-II devices to be connected to the vehicle while the dash cam is connected, providing a seamless and discreet installation solution for your Thinkware Dash Cam. The included ignition module as a power off delay feature providing consistent accessory power during varying vehicle conditions, such as engine shut-down at a red light, or alternator disengagement while driving. This feature is essential for vehicles with stop-start technology!

The OBDTH01 OBD-II Power Harness is what you need if you want to access the parking mode feature on your Thinkware Dash Cam, without installing the hard wire kit

• Plug & Play Installation
• Suitable for vehicles with OBD-II Ports (excluding electric vehicles)
• Designed for all Thinkware Dash Cams (excluding the F790 Model)
• Enables Parking Surveillance Mode Feature on your Thinkware Dash Cam
• T-Harness allows dash cam installation and still provides access to the OBD-II port in the vehicle
• Power-Off Delay feature ensures the dash cam will operate correctly in varying vehicle conditions
• 3.77M cable length
• This harness is not suitable for use in electric vehicles or HYBRID vehicles
• This harness is not suitable for use with the Thinkware F790 Model Dash Cam

Extracts power from vehicles with OBD-II Ports (excluding electric or hybrid vehicles) Enables Parking Surveillance Mode Feature. T-Harness allows dash cam installation and still provides access to the OBD-II port in the vehicle. 4M cable length.

Note: Not compatible with Thinkware F790 Model Dash Cam. Suitable for use in vehicles with an OBD connection, this is found in most vehicles manufactured after 1990 and is normally located under the dashboard. This harness is not suitable for use in electric vehicles or HYBRID vehicles. Due to the power-off delay feature, the dash cam may take up to 3 minutes to switch between continuous record mode and parking surveillance mode when the vehicle ignition has been switched off. May not allow dash cam parking mode to work with various late model European Vehicles that shut off power to the OBD port when the ignition is turned off.